Page 45 - Rack-A-Tiers-Catalog-US_web.pdf

Open Splice DAVIS MULTI-PLUG Part #99175

1 PLUG | 9 CONFIGURATIONS
JUNCTION BOX 9 NEMA CONFIGURATIONS IN I

The Davis Multi-Plug more utility. convenience. and versatility than any other.
Repair Open Splices Quick & Easy REDUCE INVENTORY
Always have the right plug in the truck and on the shelf. Guarantee efficient use of your time when you need it
ONE TOOL ASSEMBLY
Our plug can be fully assembled with nothing more than a flat head screwdriver. No specialty tools required.
NO MORE STRIPPED SCREWS
Make those dangerous open splices safe and up to code. The Our electrical cord damp system uses a simple hose clamp to secure the cord. Only one screw to be tightened and no plastic to
Open Splice Junction Box allows you to enclose the wires be stripped.
UNMATCHED POLARITY REVERSAL
without the need to disconnect them. Reversing polarity is simply adjusting the brass prongs positions. No need to rewire the device. A plug that takes notes
Designated area for notes like equipment specification. location. or anything else necessary to get the job done.
HIGH VISIBILITY RED
Features: Our high contrast bright color combination attracts the eye and reduces crush accidents.
- Made in USA 14-30 1 PH, 125/250 V, 30 AMP
- ULC approved 14-50 1 PH, 125/250 V, 50 AMP
- Made from recycled materials 14-60 1 PH, 125/250 V, 60 AMP
15-30 3 PH, 250 V, 30 AMP
- DIY friendly 15-50 3 PH, 250 V, 50 AMP
- Patent Pending 15-60 3 PH, 250 V, 60 AMP
18-30 3 PH, 120/208 V, 30 AMP
18-50 3 PH, 120/208 V, 50 AMP
Part# JB400 18-60 3 PH, 120/208 V, 60 AMP
Pack of 25 JB400.P25
Pack of 100 JB400.P100

CableClear is a patented new cable management product for wall mounted TV’s enables you to quickly
TOP HAT seamlessly at any point and time after the CableClear kit is installed. CableClear creates a 50mm (2”)
and easily hide eyesore TV cables inside the stud wall without any special DIY skills. Add cables
conduit inside the wall cavity so that you can fish the cable through and hide them completely. There is
no damage to the wall during cable installation so there’s no repairing or re-painting afterwards.
CC001 - Cable Clear Kit
CC002 - Cable Clear Extension Kit

The Top Hat – High Volume *For replacement part numbers visit Rack-A-Tiers.com
Wire Cover is a box extension
and cover plate all in one. This
patent pending design adds an
extra 35 cubic inches of box fill
to a 4×4 junction box. The Top
Hat allows to leave your wires
sticking straight out of the box
for easy installation. No need to
worry about coiling up your
wires in order to fit a flat cover
plate.

See website
for Part #s

- ULC Approved for USA and Canada
- Adds 35.8 cubic inches to the existing junction box
- Plenum Rated
- Made in USA
- Suitable for use in air handling spaces L OCKING SOL UTIONS
- Designed for 4×4 junction boxes in dry locations
Part# The patented ProLock locking cord connector was designed to prevent all extension cords
Pack of 5 - TC1400-5 with standard straight blade 15A – 120V plugs and connectors from pulling apart. It
Pack of 50 - #TC1400 eliminates the problem of accidental disconnects that result in unnecessary power loss.

44