Page 8 - Rack-A-Tiers-Catalog-US_web.pdf
P. 8

Part#
                                                   70462RY – 2” Red/Yellow
                                                   70464RY – 4” Red/Yellow
                                                   70466RY – 6” Red/Yellow
                                                   70482YB – 2” Blue/Yellow
                                                   70484YB – 4” Blue/Yellow
                                                   70486YB – 6” Blue/Yellow


                      Quickly change between 1/4in. and 5/16in. hex sizes with Malco’s unique,
                      exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits
                      over a 1/4-inch magnet-tipped, ball locking hex shaft, and can be quickly
                      reversed to change sizes. Eliminate troublesome buildup of metal shavings
                      in the hex tip with the “Easy Clean Magnet”. Just swipe with a glove or shop
                      towel to clear any metal shavings. Tested torque of the reversible hex chuck
                      driver design is equal to one-piece drivers.







                            Installs 1/2"  bolts into electrical strut channel
                            for maximum strength. The Strutter Socket                     Our Screw-Holding Screwdrivers
                            can be turned sideways, put into the strut,                   were built to solve the everyday
                            then slid over to the 1/2" bolt and tightened                 problem  of  removing/starting
                            up.  Before, you could only install the 3/8"                  screws and not having confidence
                            bolt, but now, for heavy loads and maximum                    in  our tools.  They  are made by
                            strength, use The Strutter Socket.                            Technicians for Technicians. These
                                                                                          are great for mounting hardware
                            Part# 72075                                                   and terminating leads. These are
                                                                                          also a must for working with screws
                                                                                          where gloves are required but
                                                                                          dexterity is needed. When you use
                                                                                          our products you will have
                                                                                          confidence and “Be in Control”.
                                                                                                - The unique design allows
                                                                                                   you to effortlessly attach
                                                                                                   to the screw without the
                                                                                                   worry of dropping it.
                                                                                                - The slim "pen" style fits
                                                                                                  easily into your pocket.
                                Every moment during a project that                              - The handle and release
                                you spend looking for the right tool is                           rod are both made with
                                wasted time and results in frustration                            non-conductive materials.
                                and bad decisions. The ingenious                                - Mitigates risk while
                                HOLDSaBIT slips on or off a drill in                              working in gloves and at
                                seconds. The HOLDSaBIT will hold                                  heights.
                                any 1/4" hex shank item as well as
                                pencils, nut drivers and hex shank
                                drill bits. Tips and bits are easily
                                inserted and removed.                                           For more information and
                                                                                                product numbers visit our
      - Sold in a kit with bits or sold separately.                                             web site.
      - Hold any 1/4" hex shank items as well as pencils, drill bits, etc.
      - 4 channels to fit a variety of length bits
      Part# 70000 (Bits Not Included)
      Part# 700.kit (includes 1-70140G, 1-70240R, 1-70241BL, 1-70531R, 1-70631Y & 1-70214RG)

                                                                - Reams all sizes of conduit         Part# 72422RB
                                                                - Tighten your connectors and coupling
                                                                - Fits Power Drill chucks and quick release


                                                                         SHARP ENOUGH EDGES TO
                                                                        DO THE REAMING BUT WON’T
                                                                           CUT UP YOUR FINGERS!








   7 7
   3   4   5   6   7   8   9   10   11   12   13