Page 9 - Rack-A-Tiers-Catalog-US_web.pdf

Part#
70462RY – 2” Red/Yellow
70464RY – 4” Red/Yellow
70466RY – 6” Red/Yellow
70482YB – 2” Blue/Yellow
70484YB – 4” Blue/Yellow
70486YB – 6” Blue/Yellow

Quickly change between 1/4in. and 5/16in. hex sizes with Malco’s unique,
exclusive, dual-sided magnetic hex drivers. The reversible hex socket fits
over a 1/4-inch magnet-tipped, ball locking hex shaft, and can be quickly
reversed to change sizes. Eliminate troublesome buildup of metal shavings
in the hex tip with the “Easy Clean Magnet”. Just swipe with a glove or shop
towel to clear any metal shavings. Tested torque of the reversible hex chuck
driver design is equal to one-piece drivers.

Installs 1/2" bolts into electrical strut channel
for maximum strength. The Strutter Socket Our Screw-Holding Screwdrivers
can be turned sideways, put into the strut, were built to solve the everyday
then slid over to the 1/2" bolt and tightened problem of removing/starting
up. Before, you could only install the 3/8" screws and not having confidence
bolt, but now, for heavy loads and maximum in our tools. They are made by
strength, use The Strutter Socket. Technicians for Technicians. These
are great for mounting hardware
Part# 72075 and terminating leads. These are
also a must for working with screws
where gloves are required but
dexterity is needed. When you use
our products you will have
confidence and “Be in Control”.
- The unique design allows
you to effortlessly attach
to the screw without the
worry of dropping it.
- The slim "pen" style fits
easily into your pocket.
Every moment during a project that - The handle and release
you spend looking for the right tool is rod are both made with
wasted time and results in frustration non-conductive materials.
and bad decisions. The ingenious - Mitigates risk while
HOLDSaBIT slips on or off a drill in working in gloves and at
seconds. The HOLDSaBIT will hold heights.
any 1/4" hex shank item as well as
pencils, nut drivers and hex shank
drill bits. Tips and bits are easily
inserted and removed. For more information and
product numbers visit our
- Sold in a kit with bits or sold separately. web site.
- Hold any 1/4" hex shank items as well as pencils, drill bits, etc.
- 4 channels to fit a variety of length bits
Part# 70000 (Bits Not Included)
Part# 700.kit (includes 1-70140G, 1-70240R, 1-70241BL, 1-70531R, 1-70631Y & 1-70214RG)

- Reams all sizes of conduit Part# 72422RB
- Tighten your connectors and coupling
- Fits Power Drill chucks and quick release

SHARP ENOUGH EDGES TO
DO THE REAMING BUT WON’T
CUT UP YOUR FINGERS!

8